UltraCool-IR8035T 35% VLT Transitional IR Solar Film

Was £32.88
Now from £16.50

UltraCool-IR8035T 35% VLT Transitional IR Solar Film isa transitional polyester film that darkens when in direct sunlight. This premium grade, sputter-coated, transitional polyester film reacts to ultraviolet light which is what makes it far superior to all other IR window films. On sunny days, the film reacts to the sunlight intensity and becomes darker to reduce sun, heat, and glare. On cloudy, rainy days and at night it remains lighter, maximising available daylight. Manufactured under 1000-level cleanroom conditions to maintain optical clarity, the darkening and recovery process was repeated over 5000 times without any loss in photochromic activity. This film is an excellent choice for high visibility, fade protection, heat reduction, and for automotive applications.

Clear
Product Price
+ -

  • Ask a Question

    UltraCool-IR8035T 35% VLT Transitional IR Solar Film

    Was £32.88
    Now from £16.50

    Ask a Question

      The administrator will get the request a call back
      include this product information in the Dashboard

    Fixed Roll Width

    Sample Product, 60" / 152cm

    Film Type

    Polyester

    Adhesive Type

    Pressure-sensitive

    Usage

    Interior

    Thickness

    50 Microns

    Visible Light Transmission

    35%

    UV Rejection

    >99%

    Visible Light Reflectance

    <12%

    Solar Absorption

    43

    IR Rejection

    >80%

    Solar Energy Rejected

    80%

    Manufacturer Warranty

    5 Years

    Privacy Rating

    Low

    Colours

    Grey

    STANDARD FIVE YEAR WARRANTY AND LIMITED REMEDY: GLASS FILMS PRODUCTS WILL BE FREE FROM DEFECTS IN MATERIAL AND MANUFACTURE FOR A PERIOD OF FIVE (5) YEARS FROM THE DATE OF PURCHASE.

    1. Glass Films MAKES NO WARRANTIES OR CONDITIONS, INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE OR ANY IMPLIED WARRANTY ARISING OUT OF A COURSE OF DEALING, CUSTOM, OR USAGE OF TRADE. User is responsible for determining whether the film product is fit for a particular purpose and suitable for user’s method of application. If the film product is proven to be defective within the warranty period stated above, your exclusive remedy and Glass Films’ sole obligation shall be, at Glass Films’ option, to replace the ORIGINAL product or refund the ORIGINAL purchase price of the product. In no event shall Glass Films be liable for any labour or installation costs of replacing the film product.
    2. Warranty does not cover any damage to film during installation or any issues resulting from the improper installation of films.
    3. All films are to be inspected within 7 days of receipt and also prior to installation.
    4. Glass Films products can be cleaned with a mild soapy water solution and a soft cloth.
    5. Proof of Warranty is your invoice.

    LIMITATION OF REMEDIES AND LIABILITY : Except where prohibited by law, Glass Films will not be liable for any loss or damage arising from the product, whether direct, indirect, special, incidental, or consequential, regardless of the legal theory asserted, including contract, warranty, negligence, or strict liability.

    Tools required:

    • Green Card Squeegee
    • Professional Squeegee
    • Quality Trimming Knife with 12-point snap off blade
    • Spray Bottle
    • Tape Measure

    Add 1 part washing up liquid, to 20 parts water into a spray bottle with a fine mist setting.
    Be sure to protect where applicable paintwork and surfaces from the installation fluid.

    Looking for a Window Film Application Kit?

    We now provide an easy to use window film application kit to assist you with the installation of your decorative glass film! Click the button on the right to order yours today!

    Cleaning the Glass

    • Spray area with a fine mist of your installation solution.
    • Thoroughly clean the glass with a lint free cloth or glass scraper, removing all debris.
    • Wipe the top edge of the glass. (This stops any water running down the glass after squeegeeing)
    • Squeegee the glass dry using the professional squeegee.

     

    Preparing your material (1-2 person)

    • Using a pair of sharp scissors, cut the material roughly to size (We recommend 20mm extra on the Width and Height to allow the material to be cut to the shape of the glass) It is also advisable to make sure the Top of your film is straight and in line/square with any pattern.
    • Spray Hands with Installation Fluid as to not mark the adhesive with fingerprints.
    • Remove the protective liner to expose the adhesive layer. (It may help to place two pieces of masking tape either side and pull apart to separate)
    • Spray the adhesive layer with the Installation Fluid liberally, to ensure there are no dry spots.

     

    Installing the material (1-2 person)

    • Spray Installation Fluid onto the glass, further reducing the possibility of a dry spot.
    • Facing the adhesive side of the film to the glass, place the top edge of the material onto the top edge of the glass and position accordingly, the washing up liquid should allow you to move the material on the glass.
    • Once happy with the positioning and the film is flat to the glass, spray the non-adhesive side of the glass film with the installation fluid.
    • Starting from the Middle/Top, with your professional squeegee, push the water out towards the edges, and then down the middle with a liberal amount of force. This should create a T shape which creates a seal. (Note: If you encounter resistance between the film and squeegee, simply apply more of the application fluid.)
    • Dry the top edge of the film.
    • The material should be sealed in place, you can then with your Green Card Squeegee, and Snap off Knife, trim the film to the shape of the window.
      • Place the Green Card Squeegee on the film and against the edge of the glass, then place the blade of your knife against this. This will guide your knife and protect your window frames and gaskets. Note: Making a diagonal cut between the corner of the glass and excess film prevents creasing the corner of the material while trimming.
    • Once trimmed, continue to remove the water, working from the centre seal outwards in overlapping motions with your Professional Squeegee. This ensures the maximum removal of application fluid.
    • Use your Green Card Squeegee wrapped in a non-abrasive cloth to remove any remaining bubbles, always using the shortest path to the edge.
    • Gently dry the edges and the face of the film.

     

    Aftercare

    • Avoid cleaning the material for the first 30 days, this will allow the film to completely cure to the glass.
    • Water bubbles are a factor in window filming that can not be avoided. Depending on the tools and pressure applied, you may remove up to 95% of the application fluid. The remaining 5% due to surface tension will form small bubbles and if left alone, will completely dry. This process normally takes no longer than 30 days but can take up to 60 days depending on the quality of installation.
    • A very small clear borer should be visible between the edge of the film and the frame. This is normal and is integral to the installation process as it allows the removal of the water.
    • Once your new film has completed the curing process, we would recommend you clean the film with non-abrasive clothes and mild soapy water. Please avoid abrasive pads and industrial strength cleaners.
    Navigation
    Close

    My Cart

    Close

    Wishlist

    Recently Viewed

    Close

    Great to see you here!

    A password will be sent to your email address.

    Your personal data will be used to support your experience throughout this website, to manage access to your account, and for other purposes described in our privacy policy.

    Already got an account?

    Close

    Close

    Categories