SXGF-0500 Clear Frosted Safety Film

SOLYX SXGF-0500 Clear Frosted Safety Film is a translucent, high grade polymeric calendared vinyl film with good dimensional stability, intended to simulate sand blasted glass. Ideal for obscuring direct visibility while allowing excellent light transmission.

This film is designed for application to interior glass, single or double pane and exterior facing glass. A 5 mil clear rigid Polymeric calendared vinyl film with a slight texture designed for use as a protective privacy safety film. Adhesive is a permanent acrylic pressure-sensitive adhesive formulated for exceptional clarity. Supplied on a 1.5 mil (38 micron) clear polyester liner designed to provide extremely smooth adhesive coating. Applied using the same tools and techniques for window films.

Note: Adhesive tested according to PSTC-101 Method A with 24 hr. dwell at 70 degrees F and 50% relative humidity. May vary.

Personal Safety Glazing
ANSI Z97.1-1984
16 CFR 1201 U.S.G.S. Category 1: Break Strength 100PLI CPSC 16 CFR 1201
BS 6206
JIS A5759
GB 9962-88



Select your Roll Width and Quantity Type below to obtain a price.
  • 54"
  • per Linear Metre
  • A5 Sample

Specification

Roll Width

54"

Film Type

Vinyl

Adhesive Type

Pressure-sensitive

Usage

Exterior, Interior

Thickness

5mil

Minimum Application Temp.

+40 degrees F

Service Temperature Range

-40 deg. F to +200 deg. F

Exterior Life Expectancy

3-4 years

Break Tensile

60 lb./in.

Elongation at Break

150%

Abrasion Resistance

5%

Visible Light Transmission (%)

55

UV Rejection (%)

Up to 35%

Infrared Transmission (%)

74%

Solar Absorption

18

Manufacturer Warranty

5 Years (Interior) & 3 Years (Exterior)

Installation & Warranty

Installation should be in accordance with manufacturer’s installation instructions. Installed using the same methods for installing window films.

This Solyx® product manufacturer warranty can be found under the Specification tab within this product information. All of our manufacturer product warranties will be free from defects in material and manufacture for the duration of the product warranty. Typically, our manufacturer product warranties are for five (5) years from the date of installation however, please check the Specification tab within this product to confirm the exact warranty details. All warranties commence from the date of installation. See Manufacturer Warranty Information for specific details.

Face Film
– 5 mil rigid polymeric calendared vinyl

Adhesive
– Permanent acrylic, Clear, Pressure-sensitive
– Tested according to PSTC-101 Method A with 24 hr. dwell at 70
degrees F and 50% relative humidity. May vary.

Release Liner
– 1.5 mil clear Polyester

ASTM E84 – Standard Test Method for Surface Burning Characteristics of Building Materials.
Achieved level: Class 1 (a)

SOLYX Films are suitable for installation onto fire rated glass and will not affect the rating of fire rated glass.

Menu
Translate »